Accepting A Call; Forwarding A Call (Call Deflection) - Siemens Profiset 70isdn Operating Instructions Manual

Siemens operating instructions telephone 70isdn
Table of Contents

Advertisement

20.5.99
Outgoing and incoming calls

Accepting a call

or
Loudspeaker

Forwarding a call (Call Deflection)

>
Service?
48
kap08.fm5
g
When the called party answers, you can talk handsfree
(
page 55)
or c and g
or lift the handset and speak.
The Profiset 70isdn rings with a particular call signal
(
page 21). If the caller is an ISDN user, his/her directory
number is shown in the display. The name of the caller is
displayed if it is stored in the Profiset 70isdn telephone di-
rectory.
You can conduct the call via the handset or you can acti-
vate the handsfree function (
Alternatively, you can reject the call.
Call signal sounds.
The directory number and name of the caller are dis-
played, if possible.
c or
Lift the handset, confirm "Accept call?", or press the
?
"Loudspeaker" key to talk handsfree; LED lights up.
You are connected to the calling party.
You can forward incoming calls manually (by pressing a
key) to another directory number immediately.
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
? >
2=configuration?
o
?
and
With password protection (
word.
>
09=forward call?
The upper display line indicates whether call forwarding
is activated or deactivated.
<>
Select "switch over?".
?
Save the setting. If call forwarding was previously deacti-
vated, it is now activated. If it was activated, it is now de-
activated.
Profiset 70isdn, GB: A30853-X300-B501-3-7619
page 55).
?
page 16): enter the pass-
?

Advertisement

Table of Contents
loading

Table of Contents