Table of Contents
Advertisement
STARTING THE ENGINE WITH JUMPER CABLES
You can start a vehicle that has a discharged battery by transferring electrical power to it from a battery in another vehicle.
Discharged battery
1. Prepare a set of jumper cable.
2. Apply the parking brake and shift the transmission to
sition (automatic transmission) or neutral (
(manual transmission).
3. If the booster battery is not a MF type battery, remove all vent
plugs from it. Cover the opened vent holes with cloth to avoid
a possibility of battery explosion and other hazards.
12-2
Page 2
Booster battery
4. Start the engine with the booster battery. Switch off all elec-
P
trical accessories in the vehicle with discharged battery.
po-
N
) position
5. Connect one end of the first lead of the jumper cable to the
positive terminal of the discharged battery.
6. Connect other end of this same jumper cable lead to the
positive terminal of the booster battery.
2006-10-02, ¿ÀÀü 11:07
+
• Connect the positive
cable
first when connecting.
-
• Disconnect the megative
cable first when disconnecting.
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the RODIUS and is the answer not in the manual?
Questions and answers
hand brake broken
To fix a broken hand brake on a SSANGYONG RODIUS, you can use a parking brake repair kit designed for the vehicle. The kit typically includes parts like caliper components, brake blocks, and gear actuators. These parts are used to repair or replace damaged components in the electric parking brake system. Ensure the correct repair kit (such as CLS-00259) is used. Note that auto parts changed by the user may not be covered under warranty.
This answer is automatically generated