Rear Combination Lamp - SSANGYONG RODIUS Owner's Manual

REAR COMBINATION LAMP

Turn Signal Lamp,
Tail Lamp, Stop Lamp
1. Disconnect the negative cable
on the battery.
2. Open the tailgate and disconnect
two mounting bolts.
14-6
Page 6
Stop lamp
Turn signal lamp
Tail lamp
3. Disconnect the connector and
remove the rear combination
lamp housing.
4. Turn the lamp connector to re-
move it from the rear combina-
tion lamp housing.
2006-10-02, ¿ÀÀü 11:08
5. Remove the bulb from the lamp
connector while pushing and
turning it.
6. Install the new bulb in the re-
verse order of removal.