SSANGYONG RODIUS Owner's Manual page 59

Ssangyong rodius / stavic
Hide thumbs Also See for RODIUS:
Table of Contents

Advertisement

Accelerating with Cruise Control System
• While cruise control system is running
1. Push up the ACCEL.SET. switch of a cruise control lever
and hold it until the desired speed is reached without an
acceleration pedal intervention.
2. When the desired speed is reached, release the lever.
• While cruise control system is not running
1. Accelerate using the acceleration pedal more over 36 km/h.
2. Push up the ACCEL.SET switch of a cruise control lever
and hold it.
3. And then release the acceleration pedal, slowly.
4. When the desired speed is reached, release the lever.
• Tap up while cruise control system is running
1. Push up the ACCEL.SET. switch of a cruise control lever
less than 0.5 second per one switching while the cruise
control system is running. This is a tap up switching.
2. When you operate a tap-up switching, the vehicle is accel-
erated for 1.3 km/h over the previous set speed.
3. If you want to accelerate for 13 km/h, operate the tap-up
switching ten times without accelerating with cruise con-
trol system.
4-10
Page 10
Decelerating with Cruise Control System
• While Cruise control system is running
1. Push down the DECEL.SET. Switch of a cruise control le-
ver and hold it until the desired speed is reached without
a brake pedal intervention. But the cruise control system
cannot maintain the cruise function at less than 34 km/h.
2. When the desired speed is reached, release the lever.
• When Cruise control system is not running
1. Push down the DECEL.SET. Switch of a cruise control le-
ver and hold it.
2. And then release the acceleration pedal, slowly.
3. When the desired speed is reached, release the lever. But
the cruise control system cannot maintain the cruise func-
tion at less than 34 km/h.
• Tap down while cruise control system is running
1. Push down the DECEL.SET. Switch of a cruise control le-
ver less than 0.5 second per one switching while the cruise
control system is running. This is a tap down switching.
2. When you operate a tap-down switching, the vehicle is de-
celerated for 1 km/h below the previous set speed.
3. If you want to decelerate for 10 km/h, operate the tap-down
switching ten times without brake pedal intervention.
2006-10-02, ¿ÀÀü 11:04

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RODIUS and is the answer not in the manual?

Questions and answers

Leonard
March 16, 2025

hand brake broken

1 comments:
Mr. Anderson
May 14, 2025

To fix a broken hand brake on a SSANGYONG RODIUS, you can use a parking brake repair kit designed for the vehicle. The kit typically includes parts like caliper components, brake blocks, and gear actuators. These parts are used to repair or replace damaged components in the electric parking brake system. Ensure the correct repair kit (such as CLS-00259) is used. Note that auto parts changed by the user may not be covered under warranty.

This answer is automatically generated

This manual is also suitable for:

Stavic

Table of Contents

Save PDF