4-Wheel Drive Switch - SSANGYONG RODIUS Owner's Manual

4-WHEEL DRIVE SWITCH*

Full-Time 4-Wheel Drive Vehicle (TOD)*
The vehicle equipped with the TOD 4-wheel drive evenly distributes the driving force to all wheels according to the road conditions.
Driving Mode Change (4H ↔ ↔ ↔ 4L) ↔ ↔
1. Manual Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the shift lever
into "Neutral" position. Push the desired portion of the switch
while depressing the brake pedal and clutch pedal.
2. Automatic Transmission Equipped Vehicle
Stop the vehicle on a level ground and place the gear selec-
tor lever into "N" position. Push the desired portion of the
switch while depressing the brake pedal.
Page 13
4-Wheel Drive Switch*
1. "4L" (4-Wheel Drive, Low)
Push this portion of the switch for
maximum traction in slippery roads,
steep hills and rough roads. At this
time, the "4WD LOW" indicator in in-
strument panel comes on.
2. "4H" (4-Wheel Drive, High)
Push this portion of the switch for
normal driving. This position gives
greater economy, quieter ride and
less drive train wear.
NOTE
When shifting from "4L" to "4H" in automatic transmission equipped
vehicle, move the gear selector lever from "N" to "R" position after
pushing the 4WD switch, then move it to "N" position again. This
may help to make easy mode change.
INTERIOR SWITCHES
2006-10-02, ¿ÀÀü 11:04
4-13