Table of Contents
Advertisement
SHIFT LEVER LOCK RELEASE
Shift Lock Function
This system locks the gear selector lever in the automatic
transmission according to the driving status and condi-
tions to prevent driver from making operational mistakes,
to protect the system, and to provide good driving stability.
Shift Lever Lock in "P" or "N" Position
To shift from "P", the ignition switch must be turned to ON
and the brake pedal must be depressed.
If you cannot shift out of "P", check the followings:
- The ignition key is in "ON".
- The brake pedal is d epressed.
Prohibition of Gear Shift from "N" to "R" While
Driving
To maintain the vehicle stability and protect the drive train of
the vehicle, the gear shifting from "N" to "R" is not available
when the vehicle speed about 8 km/h.
6-10
Page 10
Shift lever lock
release
If you cannot shift out of "P" with the ignition switch in ON ,
and the brake pedal depressed:
1. Apply the parking brake firmly and turn the ignition off.
2. Depress the brake pedal and push down the shift lock re-
lease lever with a stick such as a pen. Then, shift the le-
ver to other position.
WARNING
If this happens, have your vehicle repaired by the nearest Ssangyong
dealer or Ssangyong Authorized Service Center as soon as possible.
2006-10-02, ¿ÀÀü 11:05
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the RODIUS and is the answer not in the manual?
Questions and answers
hand brake broken
To fix a broken hand brake on a SSANGYONG RODIUS, you can use a parking brake repair kit designed for the vehicle. The kit typically includes parts like caliper components, brake blocks, and gear actuators. These parts are used to repair or replace damaged components in the electric parking brake system. Ensure the correct repair kit (such as CLS-00259) is used. Note that auto parts changed by the user may not be covered under warranty.
This answer is automatically generated