Starting The Engine With Jumper Cables - SSANGYONG KYRON User Manual

STARTING THE ENGINE WITH JUMPER CABLES

If the batter is weak or dead, the battery from another vehicle can be used with jumper cables to start the engine.
0
1
2
3
4
5
6
7
8
9
10
11
Discharged battery
12
Connecting order:
13
(1) The + terminal of the discharged battery
14
(2) The + terminal of the booster battery
(3) The - terminal of the booster battery
15
(4) Connect one end of the other jumper cable to the body
16
of the discharged vehicle, such as the engine block or a
front towing hook.
12-2
IN CASE OF EMERGENCY
Page 2
Booster battery
The positive (+) cable to the positive
(+) terminal.
The minus (–) cable to the minus (–)
terminal.
Be sure to observe the connecting se-
quence specified below.
1. Prepare a set of jumper cables.
2. Place another vehicle that has the same 12 V of power
near to the discharged vehicle.
3. Switch off all electrical accessories for the discharged
vehicle.
4. Apply the parking brake and shift the transmission to the
P position (automatic transmission) or neutral (N) posi-
tion (manual transmission).
5. Connect the jumper cables.
2006-10-03, ¿ÀÈÄ 2:35