Table of Contents
Advertisement
CHANGING A FLAT TYRE
1. Stop your vehicle to a safe place and turn on the hazard
flasher and then apply the parking brake.
2. Block the front and rear of the wheel diagonally opposite
to the wheel being changed.
3. Turn the ring (A) to remove the jack from the holder. Pull
out other tools from tool box.
CAUTION
Put the tools into their own locations. Turn the ring (A) to tighten the
jack into the holder.
12-6
Page 6
4. Open the tailgate and remove the cap for spare tyre mount-
ing hole with a screwdriver or coin.
2006-10-02, ¿ÀÀü 11:07
Close
Open
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the RODIUS and is the answer not in the manual?
Questions and answers
hand brake broken
To fix a broken hand brake on a SSANGYONG RODIUS, you can use a parking brake repair kit designed for the vehicle. The kit typically includes parts like caliper components, brake blocks, and gear actuators. These parts are used to repair or replace damaged components in the electric parking brake system. Ensure the correct repair kit (such as CLS-00259) is used. Note that auto parts changed by the user may not be covered under warranty.
This answer is automatically generated