Electronic Compass
Turning Calibration
When the multimeter is installed to the vehicle or the battery
is replaced, you have to perform calibration by circulating your
vehicle. If not, there will be misreading in direction.
NOTE
The direction will be indicated while driving.
1. If you press the MODE and UP button simultaneously for
more than 1 second, the current direction flashes.
2. Turn the vehicle over 1 complete circle within 128 seconds
slowly, then the calibration will be accomplished.
3. When the calibration is finished, the vehicle's new direc-
tion will be indicated.
Page 27
N
Electronic
NW
Compass
W
SW
S
NOTE
• You can turn to any direction, left or right.
• When the calibration is completed, the compass does not flash
• If the compass continues to flash, turn again slowly until it goes off.
Release conditions for turning calibration
• When the MODE and UP button simultaneously are pressed
• When the vehicle is not turned within 128 seconds after cali-
NE
E
It indicates 8-direction by interval of 45° ac-
cording to the vehicle's driving direction.
This is available only when the vehicle
speed is over 2.8 km/h.
SE
anymore.
briefly.
bration mode started.
INTERIOR SWITCHES
2006-10-02, ¿ÀÀü 11:04
4-27
Need help?
Do you have a question about the RODIUS and is the answer not in the manual?
Questions and answers
hand brake broken