How To Fasten The Three Point Seat Belt In Front Seats - SSANGYONG RODIUS Owner's Manual

HOW TO FASTEN THE THREE POINT SEAT BELT IN FRONT SEATS

1. Pull out the latch plate from the
retractor. If the seat belt is locked when
being pulled out, rewind it completely
in the retractor, then pull it out to the
desired length.
CAUTION
Sit back in the seat with the seatback in an
upright position and wear the seat belt.
WARNING
Make sure that the seat belt is not twisted.
8-6
Page 6
2. Position the shoulder belt across the
body and the lap belt as low as pos-
sible across the hips. Insert the latch
plate into the buckle until it clicks.
3. Adjust the seat belt height as required.
WARNING
Improperly worn seat belts could cause se-
rious injury or death.
• Put the lap belt as low as possible across
the hips. Do not put it across waist. In an
accident, the belt may pressurize on your
abdomen. This may also result serious in-
ternal injuries.
• Shoulder belt should be positioned midway
over the shoulder, never across the neck.
4. Pull the latch plate to make sure it is
securely locked.
5. To unfasten the seat belt, press the
button on the buckle.
2006-10-02, ¿ÀÀü 11:06