Starting The Engine With Jumper Cables - SSANGYONG RODIUS Owner's Manual

Ofrecido por www.electromanuales.com

STARTING THE ENGINE WITH JUMPER CABLES

You can start a vehicle that has a discharged battery by transferring electrical power to it from a battery in
another vehicle.
1. Prepare a set of jumper cable.
2. Apply the parking brake and shift the transmission to
sition (automatic transmission) or neutral (
(manual transmission).
3. If the booster battery is not a MF type battery, remove all vent
plugs from it. Cover the opened vent holes with cloth to avoid
a possibility of battery explosion and other hazards.
12-2
IN CASE OF EMERGENCY
Discharged battery Booster battery
4. Start the engine with the booster battery. Switch off all elec-
P trical accessories in the vehicle with discharged battery.
po-
N
5. Connect one end of the first lead of the jumper cable to the
) position
positive terminal of the discharged battery.
6. Connect other end of this same jumper cable lead to the
positive terminal of the booster battery.
• Connect the positive + cable
first when connecting.
-
• Disconnect the megative
cable first when disconnecting.