Position Memory Setting - SSANGYONG KYRON User Manual

POSITION MEMORY SETTING*

The position memory is available for up to three drivers. Each driver can set his/ her own
0
driver's seat, outside rearview mirrors. The information will individually be stored in the
integrated computer. If somebody has moved the seat, the memory positions can be
1
recalled automatically by pressing the position button.
2
To Store the Memory Settings
3
1. Position the transmission shift lever to "P" with the
4
ignition switch "ON" (for your safety, do not start the
engine). In case of a manual transmission vehicle, you
5
must apply the parking brake too.
2. Adjust the driver's seat and outside rearview mirrors to
6
the desired positions.
7
3. Press the (SET) switch. The indicator on the switch
comes on.
8
4. Within 5 seconds, press one of the position buttons
9
( ), ( ), (
memory setting is completed, a buzzer sounds twice.
10
11 To Recall the Memory Settings
1. Press and hold one of the position buttons (
12
( ), ( ) you want until the buzzer sounds.
13
2. The driver's seat and outside rear view mirrors start
to move to the stored positions. If you drive off during
14
this recalling process, this automatic memory setting
stops operating.
15
3. Wait until they stop moving.
16
4. When the process is completed, a buzzer sounds twice.
7 - 6
SEATS
Page 6
) you want to set. When the
),
STOP button
Position button
(1, 2, 3)
SET button
2006-10-03, ¿ÀÈÄ 2:34