Call Director (Calling A Specific Handset) (C 250 Only) - Siemens Gigaset C200 Instructions Manual

Call Director (calling a specific handset) (C 250 only)

You can set your phone so that an external caller is put through direct to a specific hand-
set. You must activate the Call Director for this. When he has dialled your number, the
caller is asked to select the number of the person he wishes to speak to, or he hears your
personal Call Director announcement. He now has 5 seconds to dial the internal number
of the required handset.
Precondition: The Call Director has been activated.
If the dialled party does not take the call, the answering machine will
accept it provided it is switched on. If the ring delay of the answering
i
machine is set to Immediately (page 69), then the call director
announcement will not be played.
Activating/deactivating the Call Director (C 250 only)
[_______________]
MENU
[__________] [_____________________________________________________________]
Base Settings
[__________] [_____________________________________________________________]
Call Director
[_____________________________________________________________] [__________]
Call Director Activation
Press the display key to open the menu.
Select the menu item and confirm.
[_________]
OK
Select the menu item and confirm.
[_________]
OK
Confirm to activate or deactivate the Call Director (
OK
= On).
Long press (back to idle status).
Using several handsets
‰
81