Registering And De-Registering Handsets; Automatic Registration: Gigaset C 2 On Gigaset C 200 Or C 250 - Siemens Gigaset C200 Instructions Manual

Registering and de-registering handsets

You can register up to six handsets on your base.
A C 2 handset that is not yet registered on a base is registered automatically. Handsets
that belong to the Gigaset 1000, 2000, 3000, 4000 families and handsets made by
other manufacturers must be registered manually.
A C 2 handset can be registered on up to four bases.

Automatic registration: Gigaset C 2 on Gigaset C 200 or C 250

Any handset that is not registered on a base can be registered automatically.
To register your handset for the first time, place it in the base with the display up. Reg-
istration takes around one minute. While registration is in progress the screen displays
Registering and Base 1 flashes. The handset will be automatically assigned the low-
est unassigned internal number (1–6). You will see this number in the top left of the dis-
play after registration, e.g. '1'. This means that the handset has been assigned the first
internal number. If all internal numbers 1–6 have been assigned (six handsets are reg-
istered on a base), the number 6 is overwritten if that handset is in idle status.
You can change the handset name (page 77).
Automatic registration is not possible when the base on which you
N
wish to register the handset is being used to make a call.
i
You can give a registered handset a different internal number
N
(page 78) or a different name (page 77).
Registering and de-registering handsets
73