Making Calls - Basic Functions; Answering Calls; Answering A Call With The Handset; Answering A Call With The Speaker (Speakerphone Mode) - Siemens optiPoint 500 economy User Manual

Making Calls – Basic Functions
Step by Step
Speaker
14
Making Calls – Basic Functions

Answering Calls

Special default ring signaling is set for your telephone:
• When you receive an internal call or callback, your
telephone rings once every four seconds (single-
tone sequence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
• When you receive a timed reminder, your telephone
rings twice (double-tone sequence, i.e. long ring fol-
lowed by short ring).
The caller's number appears on the display unless the
caller suppresses it.
If a name for the caller's number has been stored in your
HiPath 1220, it will be displayed, if configured by the
service personnel.

Answering a Call With the Handset

The telephone rings. The caller is displayed.
n
Lift the handset.
u v
or To raise or lower the volume, keep pressing the keys un-
til the desired call volume is set.
Answering a Call with the Speaker (Speaker-
phone Mode)
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.
The telephone rings. The caller is displayed.
Press the key. The LED lights up.
Speakerphone mode.