Repeater Support; Restoring The Base Factory Settings - Siemens Gigaset C200 Instructions Manual

Repeater support

With a repeater you can increase the range and reception strength of your base; the
repeater must be registered. To use the repeater you must first activate the repeater
mode. This will cancel any calls that are in progress.
[_______________]
MENU
[__________] [_____________________________________________________________]
Base Settings
[__________] [_____________________________________________________________]
Additional Features
[__________] [_____________________________________________________________]
Repeater Mode
[________]
OK

Restoring the base factory settings

Resetting does not affect the system PIN and handsets are still registered.
[_______________]
MENU
[__________] [_____________________________________________________________]
Base Settings
[__________] [_____________________________________________________________]
Base Reset
[_______]
OK
[________]
OK
Press the display key to open the menu.
Select the menu item and confirm.
[_________]
OK
Select the menu item and confirm.
[_________]
OK
Select the menu item and confirm (
[_________]
OK
Press the display key to confirm the prompt.
Long press (back to idle status).
Press the display key to open the menu.
Select the menu item and confirm.
[_________]
OK
Select the menu item and confirm.
[_________]
OK
Enter the system PIN (the factory setting is 0000)
and confirm.
Press the display key to confirm the prompt.
Setting the base
‰
= On).
97