Correcting Wrong Inputs; Idle Status - Siemens Gigaset C200 Instructions Manual

Correcting wrong inputs

After a correct input you will hear a confirmation tone (rising tone sequence), an incor-
rect input is indicated by an error tone (falling tone sequence). You can repeat the input.
If you have entered incorrect characters in the text, you can correct them as follows:
Deleting characters to the left of the cursor with
To correct a telephone number or text, use the display keys
to the right of the incorrect character. Now press the display key
deleted. Now enter the correct character.
Inserting characters on the right of the cursor
If you have omitted a character, use the display keys
you want to insert the character, and key it in.

Idle status

Display in idle status
Gigaset C 200
1
12:50
12.04.03
¼
Þ
INT MENU
or
Gigaset C 250
×
1
12:50
12.04.03
¼
Þ
INT MENU
Reverting to idle status from anywhere in the menu
Press the 'end call' key
N
Press no key: The display automatically reverts to the idle status after 2 minutes.
N
Changes which you have not confirmed/stored by pressing
Operating the telephone, menu guidance
V
Time and date are
already set
V
Time and date are
already set
a
for around 1 second, or
Û
uv
to move the cursor
Û
. The character is
uv
to go to the place where
will be rejected.
OK
13