Function Selection; Incoming Calls; Answering A Call With The Handset - Siemens HiPath 8000 optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
24

Function Selection

A function is selected with the keys
firmed with the
line indicates that additional functions are available. In
idle mode, there are no menu options available (no
prompt).
At the end of the menu list the
ginning of the list, and at the beginning of the list the
key goes to the end of the list.
When you select a function using the
step by step through the call procedure until all param-
eters have been entered.

Incoming Calls

The Telephone rings giving the set call signal
page 126.
If calling party information (name, number, or both) is
transferred, it appears in the display.
If no information is transmitted, you will see "Private" or
"Unknown" on the phone's display.
If you are defining settings on the telephone
when a call arrives, the process is paused. After
the telephone conversation, the telephone auto-
matically returns you to the point in the menu
structure you were in before the call.
Refer to
coming pickup group calls.

Answering a Call With the Handset

The telephone rings. The caller is displayed on the
screen.
n
Lift the handset.
u v
or
Set call volume. To raise or lower the volume, press the
relevant key until the desired volume is set.
:
key. The arrow icon (>) in the second
>
page 60 for information to answer in-
< >
or and con-
key goes to the be-
<
:
key, you are led