Temporarily Activating Anonymous Calling For The Next Call; Temporarily Deactivating Anonymous Calling For The Next Call - Siemens OpenScape Voice Operating Manual

OpenScape Voicefunctions
Step by Step
136
Temporarily activating anonymous calling for
the next call
If your administrator activated caller ID transmission for
your phone, you can deactivate this setting for the next
call as follows:
^
Lift the handset.
j
Enter the code (see the table of codes
Z
Wait until you hear the confirmation tone.
j
Dial the phone number of the party you want to contact.
Caller ID transmission is reactivated after this call.
Temporarily deactivating anonymous calling
for the next call
If your administrator suppressed caller ID transmission
for your phone, you can enable this setting for the next
call as follows:
^
Lift the handset.
j
Enter the code (see the table of codes
Z
Wait until you hear the confirmation tone.
j
Dial the phone number of the party you want to contact.
When you end this call, caller ID transmission is sup-
pressed once again for the next call.
page 143).
page 143).