Attaching The Belt Clip; Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock - Siemens Gigaset C200 Instructions Manual

Attaching the belt clip

Push the belt clip onto the back of the handset until the lugs click into the recesses on
either side of the handset.

Activating/deactivating the handset

To activate the handset press the 'end call' key
tion tone (rising tone sequence).
To deactivate the handset, press the 'end call' key
(confirmation tone).
i
The handset activates automatically when placed in the base or charger.

Activating/deactivating the keypad lock

You can 'lock' the keys on your handset, e.g. when carrying the unit in your pocket or
bag. This protects the keypad against inadvertent activation.
To deactivate the keypad lock, press the hash key
tone).
The keypad lock deactivates automatically when you receive a call. It
N
re-activates when the call is finished.
i
When the keypad lock is active, you cannot even call emergency num-
N
bers.
a
and hold. You will hear a confirma-
a
again in the idle status and hold
Press the hash key and hold (confirmation tone).
Ø
The icon appears in the display.
R
Preparing to use your phone
again and hold (confirmation
11