Activating/Deactivating Advisory Tones - Siemens Gigaset C200 Instructions Manual

Handset settings

Activating/deactivating advisory tones

Your handset uses 'advisory tones' to tell you about different activities and statuses. The
following advisory tones can be activated and deactivated individually (the default set-
ting is On).
Key click: Every key press is confirmed
N
Acknowledge tones:
N
– Confirmation tone (rising tone sequence): at the end of an input/setting, when
the handset is placed in the base and when a new text message or a new entry
arrives in the calls list/answering machine list (C 250 only)
– Error tone (a falling tone sequence): with incorrect inputs
– End of menu tone: when scrolling at the end of a menu
Battery tone: The batteries must be charged.
N
[______________]
MENU
[__________] [_____________________________________________________________]
Audio Settings
[__________] [_____________________________________________________________]
Advisory Tones
either ...
[_____________________________________________________________] [__________]
Key Tones
or ...
[__________] [_____________________________________________________________]
Battery Low
[__________] [_____________________________________________________________]
On
or ...
[__________] [_____________________________________________________________]
Confirmation Tone
... then
92
Press the display key to open the menu.
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm.
[_________ ]
OK
Activate/cancel key click:
‰
Confirm ( = On).
OK
Activate/cancel battery warning tone:
Select the menu item and confirm.
[_________ ]
OK
Select condition (Off, On, During Call) and confirm,
e.g. On (checked
[_________ ]
OK
Press the 'end call' key briefly to return to the previ-
ous menu level.
Activate/cancel confirmation tones:
Select the menu item and confirm (
[_________ ]
OK
Long press (back to idle status).
‰
).
‰
= On).