Step by Step
Answer call?
Loudspeaker
Incoming Calls
The Telephone rings giving the set call signal
page 99.
If calling party information (name, number, or both) is
transferred, it appears in the display.
If you are defining settings on the telephone
when a call arrives, the process is paused. After
the telephone conversation, the telephone auto-
matically returns you to the point in the menu
structure you were in before the call.
Refer to
coming pickup group calls.
Answering a Call With the Handset
The telephone rings. The caller is displayed on the
screen.
n
Lift the handset.
u
v
or
Set call volume. To raise or lower the volume, press the
relevant key until the desired volume is set.
Answering a Call Without the Headset
(Speakerphone Mode)
You can't use this function with optiPoint 410/
420 economy/economy plus
The telephone rings. The caller is displayed on the
screen.
:
Confirm
>
or
Press key. LED lights up.
Speakerphone mode.
u
v
or
Adjust volume. To raise or lower the volume, keep
pressing the keys until the desired volume is set.
Notes on speakerphone mode:
•
Tell the other party that you are using speakerphone
mode.
•
The speakerphone works bests at a low receiving
volume.
Operating the Telephone with the Display
page 53 for information to answer in-
23