Operating The Answering Machine With Voice Prompts - Siemens Gigaset C200 Instructions Manual

Using the answering machine in the C 250 Base

Operating the answering machine with voice prompts

You can use voice commands to control message playback. Four users (user 1 to 4) can
store their pronunciation of the commands Delete, Forward and Back for voice rec-
ognition. For the recording, the user must speak all three voice patterns in the above
order.
Recording voice commands
Record your voice pattern in quiet surroundings.
[______________]
MENU
[__________] [_____________________________________________________________]
Voice Mail
[__________] [_____________________________________________________________]
Voice Prompts
[_____________________________________________________________] [__________] Record Word
[_______]
OK
[__________] [_____________________________________________________________] User 2
[_______]
OK
The loudspeaker activates. You will hear the ready tone (a short tone) when prompted
to speak the first command. Now speak the command Delete. You will hear the ready
tone again when prompted to repeat the command. Repeat Delete.
The loudspeaker activates. You hear the ready tone (a short tone): Speak now. You will
hear the ready tone again when prompted to repeat the command. Repeat Delete.
You are now prompted to speak the second command Forward . Proceed exactly as you
did for the Delete command. Finally, speak the third command Back.
[_______]
OK
i
No further voice patterns can be recorded when the memory is full.
66
Press the display key to open the menu.
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm.
[_________ ]
OK
Confirm.
OK
Confirm the message in the display.
Select and confirm, e.g. User 2.
[_________ ]
OK
Confirm the message in the display.
Confirm. The recording is stored.