Registering/De-Registering Other Handsets - Gigaset CX150 isdn Instructions Manual

Registering/de-registering other handsets

Registering/de-registering other handsets
You can register up to six cordless devices on your base (handsets or data modules
(M101data, M105data).
A Gigaset S1, C1 or C2 handset that is not yet registered on a base is registered
automatically. You must register the SL1 and Gigaset handsets from Gigaset 1000, plus
handsets made by other manufacturers manually.
A C1 handset can be registered on one base.
Automatic registration: S1, C1, and C2 handsets
Any handset that is not registered on a base can be registered automatically.
To register for the first time, place the deactivated handset in the base with the display
facing upwards. Registration takes around one minute. The handset automatically
receives the lowest free internal number from the range Int.11 to Int.16. After
registration you will see a number in the display, e.g. "1". This means that the handset
has been assigned the first internal number.
If the internal numbers Int.11 to Int.16 have already been assigned, please de-register
another handset first (page 90).
Automatic registration is only possible if no call is being made from
N
the base on which you are registering the handset and the answering
i
machine is in idle status.
You can assign another internal name to a registered handset
N
(page 71).
Manual registration: Gigaset C1
If internal numbers Int.11 to Int.16 on your phone have already been assigned, please
de-register another handset you no longer require before registering a new one
(page 90).
You must initiate handset registration on the handset and on the base.
1. On the base
Press the registration/paging key on the base for about 3 seconds. This starts the
registration.
P
88
Registration/paging key