Gigaset CX150 isdn Instructions Manual page 61

Operating the answering machine (on CX150isdn)
Starting remote control when away from home
For remote control you need a telephone that transmits DTMF tones (tone dialling). It is
important to enter the AM PIN immediately while the announcement is being played. In
addition Remote control and, if required, Remote delete must be activated.
~
~
If you enter the AM PIN wrongly three times in a row the connection will be terminated.
After this you can operate the answering machine using the key commands (page 59).
Starting remote control from a handset (internal)
Comfort and standard handset
INT
~
~
Handset made by another manufacturer (GAP mode)
Lift the receiver and, if required, press another key to initiate an internal call.
~
~
Cordless phone adapter and normal telephone
Automatic line seizure must be activated. As supplied, automatic line seizure is
activated!
Lift the receiver and then:
~
~
58
Dial your own telephone number.
When the announcement starts, enter the AM PIN at
once.
Press the display key.
Enter internal phone number for the answering
machine: 91 for AM1, 92 for AM2 or 93 for AM3.
If the AM lock has been set (page 65), enter the AM
PIN.
Enter internal phone number for the answering
machine: 91 for AM1, 92 for AM2 or 93 for AM3.
If the AM lock has been set (page 65), enter the AM
PIN.
Enter internal phone number for the answering
machine: 91 for AM1, 92 for AM2 or 93 for AM3.
If the AM lock has been set (page 65), enter the AM
PIN.