Connecting the base station
Underside of
base (enlarged
view)
1.
Plug one of the ISDN cable jacks into the socket in the base (it clips into place).
N
Position cable in the cable recess.
N
Insert the second ISDN cable jack into the NTBA (ISDN connection).
N
Underside of
base (enlarged
view)
2.
Insert the small jack on the power cord into the socket on the underside of the
N
base.
Position cable in the cable recess.
N
Plug the power supply unit into your power outlet.
N
Keep the power supply unit plugged in at all times to ensure your phone
is ready for use whenever you need it.
i
Neither the base nor the registered handsets will operate in the event of
a power failure. However, all the settings and stored information
(messages, directory entries etc.) are retained indefinitely.
Cable recess
Cable recess
Preparing to use your phone
ISDN
connection
cable (NTBA)
1.
Phone jack with
ISDN
connection
cable
Outlet
2.
Power supply unit
with power cord
7