Setting The Answering Machine (On Cx150Isdn); Assigning A Receive Msn - Gigaset CX150 isdn Instructions Manual

Setting the answering machine (on
CX150isdn)
Once you have connected your telephone your answering machine is ready for use.
Answering machine AM1 is set to be shown and activated. It displays all messages (on
all receive MSN's). AM1 can be played back and set from all handsets (factory setting).
All phrases in the answering machine are in English.
As supplied, AM2 and AM3 are hidden (page 62) and are deactivated. To use them you
must first set them to be shown and then assign all shown answering machines their
own receive MSN's.
You can configure AM1, AM2 and AM3 separately.

Assigning a receive MSN

You can assign one or more receive MSN's to each (shown) answering machine (AM1,
AM2, AM3). However, each MSN can only be assigned to one answering machine (only
one recording can be running at any one time).
MENU
s
Base Settings OK
s
Settings
s
Setup user
Setup device
s
MENU
s
Receive MSN
s
Once an answering machine has been assigned to a receive MSN it can only be set and
operated via handsets/terminals to which the same receive MSN is assigned.

Setting the answering machine (on CX150isdn)

Open the menu.
Select the menu item and confirm.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Confirm.
OK
Select answering machine, INT 91: AM 91 for AM1,
INT 92: AM 92 for AM2 or INT 93: AM 93 für AM3.
Open the submenu.
Select the menu item and confirm.
OK
Select the receive MSN and confirm, e.g. MSN:
OK
Anna. Only the MSN's that are still not assigned to
an answering machine are offered.
Repeat this procedure for all receive MSN's that you
wish to assign to the answering machine.
61