Transferring Calls; Dealing With A Waiting External Call - Cw (Call Waiting) - Gigaset CX150 isdn Instructions Manual

Functions during a call

Transferring calls

Transferring a call to an external number – ECT (Explicit Call Transfer)
Preconditions:
The service is supported by your network provider.
N
It is only possible to transfer a call if the exchange also supports ECT. If this is not the
N
case, then the external call is disconnected. The number cannot be called back.
You are making an external call and would like to transfer it to another external user.
Establish an external enquiry call (page 19), and then press the end call key
before the other party has answered) to transfer the call.
Transferring a call to another handset
You are making an external call and would like to transfer it to another handset.
Establish an internal enquiry call (page 20), and then press the end call key
before the other party has answered) to transfer the call.
Dealing with a waiting external call – CW (Call Waiting)
Precondition: Call Waiting (CW) has been set up (page 78).
You hear the call waiting tone (short beep) if you receive an external call while
conducting another call (internal or external). The caller's number or name will appear
in the display if Calling Line Identification is enabled.
There are three options for dealing with a waiting external call:
Accept the waiting call – enquiry call:
MENU
Waiting
Reject the waiting call:
MENU
s
Waiting
If you reject the call waiting tone on your handset, it can still be heard on
i
other registered handsets.
Change caller:
a
c
22
Open the menu.
Confirm.
OK
You accept the waiting call and the first call is put on
hold.
To toggle between both callers see page 21, for a
conference call see page 21.
Open the menu.
Select the menu item and confirm.
OK
End your current call. The waiting call becomes a
normal call.
Press the talk key to accept the call.
a
(even
a
(even