Registering A Repeater - Gigaset CX150 isdn Instructions Manual

Registering a repeater

Precondition: Gigaset Repeater has been deactivated (mains cable unplugged).
1. Press the registration/paging key on the base station for about 3 seconds. The key
flashes.
Check that there are no other base stations registering in the vicinity of
i
the Gigaset Repeater during this procedure.
2. Plug the Gigaset Repeater into the mains. The LED on the Gigaset Repeater flashes.
After a short while the LED is permanently illuminated. This indicates that
registration has been completed and the repeater is ready for use.
Further information is available in the operating instructions for the Gigaset Repeater.
Operating with other devices
85