Remote Control - Gigaset CX150 isdn Instructions Manual

Remote control

You can control your answering machine remotely from a registered handset or any
external connection or mobile telephone, e.g., to play back and delete messages. Apart
from the first step, the procedure is the same for both kinds of remote control.
Precondition:
Remote control from an external connection is only possible if you have defined an
N
AM PIN (page 65). You must always enter the AM PIN when operating from an
external device.
To be able to operate an answering machine from an external device fully (change
N
settings, delete messages) you must enable remote control and remote delete (see
below).
Notes on remote control
If a functions requires two keys to be pressed, then you must press both keys within
4 seconds. Otherwise the procedure is terminated or else only the function for the
second key is carried out. If you press the wrong key first you can press
wrong entry.
You can call up voice-guided help for some functions:
0 ;
: ;
F ;
9 ;
Enabling remote control and remote delete
When the phone is supplied, remote control and remote delete are deactivated. You
must enter the settings for each of the three answering machines you wish to operate
remotely.
Precondition: You have selected an answering machine (page 48).
s
Settings
s
Remote options
Remote control
s
Remote delete
Operating the answering machine (on CX150isdn)
Help with deletion
Help with new messages/phrases
Help with recording
Help with different operating modes
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Set remote control:
Select the menu item and confirm
OK
‰
( = activated).
If required, set remote delete:
Select the menu item and confirm
OK
‰
( = activated).
E
to cancel the
57