Hiding/Showing An Answering Machine - Gigaset CX150 isdn Instructions Manual

Setting the answering machine (on CX150isdn)

Hiding/showing an answering machine

If you only want to operate one or two answering machines for your connection you can
remove the other answering machine(s) from all displays and menus. When supplied,
AM1 is set to show, AM2 and AB3 are hidden.
When hidden there must be no messages or memos remaining in the answering
machine:
If there are new messages/memos you have not yet played back on the answering
N
machine, you will be notified when you try to hide it. The answering machine will
continue to be shown.
If, when you wish to hide an answering machine, it still contains old messages/
N
memos that have already been played back, you will be asked if you wish to delete
the old recordings. The answering machine will only be hidden if you confirm
with OK.
MENU
s
Base Settings
s
Settings
s
Setup user
Setup device
s
MENU
either ...
s
Hide AM?
or ...
s
Show AM?
When an activated answering machine is hidden it is deactivated. When it is set to show
again, the answering machine returns to the status it had before it was hidden.
62
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Confirm.
OK
Select the internal numbers for the answering
machine (INT 91, INT 92 or INT 93).
Open the submenu.
Hide answering machine:
Select the menu item and confirm.
OK
Show answering machine:
Select the menu item and confirm.
OK