Conference Call - Gigaset CX150 isdn Instructions Manual

Toggling
Precondition: You have established an enquiry call (see page 19 and see page 20).
There is both an active call (the one established with an enquiry call) and a held call (the
first). You can speak to both callers one at a time.
t s
Use to swap between the two callers.
End enquiry call/toggling:
either ...
MENU
End
or ...
a

Conference call

Precondition: You have established an enquiry call (see page 19 and see page 20).
There is both an active call (the one established with an enquiry call) and a held call (the
first). In a conference call you can speak to both other callers at the same time.
You can make a conference call with
i
two external users or
N
with one internal user and one external user.
N
It is possible to conduct two conference calls at the same time on one base.
Establishing a conference
You are making an enquiry call. The first caller is put on hold.
Press Conference to establish a conference call.
Ending a conference
You have several options for ending a conference call:
either ...
a
or ...
MENU
INDIV.
End the call that is currently active:
Open the menu.
Confirm. You return to the waiting caller.
OK
Press the end call key.
You end the conference:
Press the end call key
The conference call is ended; the two other users will
hear the busy tone.
You change the conference to an enquiry call:
Open the menu.
Confirm to change the conference to an enquiry call
OK
(see page 19 and page 20).The connection that was
active immediately before the conference was
established becomes the active call again.
Functions during a call
21