Output Channel Configuration Controls; Output Channel Id (Gui Only); Output Channel Source/Destination (Gui Only) - Midas PRO SERIES Owner's Manual

Output channel configuration controls

Output channel configuration controls
There are a number of output channel controls that are loosely termed 'channel
configuration' controls. The following table shows the configuration controls available
on each output and references the pertinent section within this chapter.
Table 20: Output channel configuration controls
Channel controls
Output channel ID
Output channel
source/destination
Stereo linking
Gain swap
Mix
Input mode
Link fader
Bus trim
Direct input
Safes (EQ,
dynamics, mic,
auto, mute and
fader)
Insert
Delay
Processing order

Output channel ID (GUI only)

You can change the channel name in the GUI
channel strip. This can be done in the output
channel overview or in any of the processing areas.
To change the background colour of the output channel name field (green in the
example shown) and/or the channel name, open the Output Channels Sheet screen
of the GUI menu.
>> To change the channel name in the GUI channel strip
Click within the channel name field and type in the new channel name (see "Text
editing" on page 57).

Output channel source/destination (GUI only)

The channel's destination is shown in the text field
of the configuration processing area. If no
destination has been selected, it will contain the
text "Unassigned" (as shown right). You can select the destination for this channel by
clicking dest, which opens the Patching screen (see Chapter 8 "Patching" on page 71).
For routing information, see Table 25 "Navigating to the Patching screen" on page 418.
PRO Series Live Audio Systems
Owner's Manual
Aux Return
Yes Yes
Destination Source
Yes Yes
N/A Yes
Yes N/A
N/A Yes
N/A N/A
Yes N/A
Yes N/A
All six Five only
(excluding
dynamics)
Yes N/A (on
separate
processing
area)
Yes N/A
Yes N/A
Matrix Master
Yes Yes
Destination Destination
Yes Yes
N/A N/A
N/A N/A
N/A N/A
Yes N/A
Yes Yes
Yes Yes
All six All six
Yes Yes
Yes Yes
Yes Yes
327
Refer to
Page 327
Page 327
Page 328
Page 328
Page 328
Page 328
Page 328
Page 328
Page 328
Page 329
Page 329
Page 329
Page 329