Midas PRO SERIES Owner's Manual page 209

Delay effect
Item
10
11
12
13
14
15
16
17
18
19
20
PRO Series Live Audio Systems
Owner's Manual
Control
Damping section
EQ section
Rate control knob
Model select
button
LR Out section
Gain control knob
Mix control knob
HF Depth control
knob
Right channel
delay time control
knob
Tempo control
knob
Tap button
Function
Contains a HF control knob that adjusts the HF
attenuation of delay repeats and an LF control knob
that adjusts the LF attenuation of delay repeats.
Contains a HI control knob that adjusts the amount
of HF (high EQ) cut or boost applied to the output.
LO control knob adjusts the amount of LF (low EQ)
cut or boost applied to the output. Range of both is
-12 to +12, with 0 at top dead centre.
Adjusts rate of delay modulation. Range is between
0.001Hz and 10Hz, with 0.7Hz at top dead centre.
Selects digital or analogue delay resolution. Current
selection is shown by the illumination of one of the
LEDs above (Dig. or Anlg.).
Contains an ON switch for activating delay.
Adjusts the amount of gain between -20 and +20,
with 0 at top dead centre.
Adjusts the mix between dry (0%) wet (100%).
Adjusts depth of delay modulation. Range is 0 to
100, with 50 at top dead centre.
For entering the desired delay time (in ms).
Adjusts the tempo in tempo mode. Range is from 60
to 240 beats per minute (bpm).
For manually tapping the tempo once the unit is in
BPM Synch (TAP TEMPO) mode.
167