Midas PRO SERIES Owner's Manual page 448

406
Error Message
shell command
error
source point
scene is empty
specified file is
already locked
specified file was
not found
stdio stream error
stdio stream open
error
stdio stream seek
error
storage policy
violation
t
the <file/
automation>
manager is not
registered
u
unknown
parameter enum
value
System(s) Problem
File and This is a critical internal error.
Automation
Automation Specified source scene is an
empty 'slot'.
File and Another task is currently
Automation accessing the file
File and The file could not be found on
Automation the specified device, that is,
the internal compact flash of
the PRO Series or USB
memory stick (if connected).
File and This is a critical internal error.
Automation
File and This is a critical internal error.
Automation
File and This is a critical internal error.
Automation
File and There has been a 'storage
Automation policy' violation. (This is not
necessarily a critical error.)
File and The System Manager is
Automation momentarily unavailable.
Automation A parameter with a value that
was not valid was supplied to
the MC.
Appendix G: Troubleshooting
Solution
This is an indication of a
serious error. Contact Midas
Technical Support.
Only carry out this type of
operation on a scene that is
not empty.
Try again.
• If the device is the internal
compact flash of the PRO
Series, this could be an
indication of a serious
problem. Contact Midas
Technical Support.
• If the device is the USB
memory stick, check that the
device has not been
disconnected from the control
surface.
This is an indication of a
serious error. Contact Midas
Technical Support.
This is an indication of a
serious error. Contact Midas
Technical Support.
This is an indication of a
serious error. Contact Midas
Technical Support.
Ensure that all software
components are up to date.
If the problem persists
Contact Midas Technical
Support.
Try again.
Try again. If this occurs
again, contact Midas
Technical Support.
PRO Series Live Audio Systems
Owner's Manual