Midas PRO SERIES Owner's Manual page 446

404
Error Message
i
immutable scene
(cannot delete
'safe' or 'current'
scene)
j
jog position is
empty
m
missing file
missing
navigation state
mtools lookup
n
no CBMA access
no next scene
no previous scene
no scene data
no show loaded
System(s) Problem
File and The operation on the current
Automation or safe scene is not allowed.
The safe scene cannot be
edited or deleted and you
cannot store to it. Also, you
cannot delete the scene last
recalled to the control
surface. (Precludes the use
of the Now button.)
Automation The current scene is empty.
File and The required file cannot be
Automation found.
Automation Critical internal error.
File and Critical internal error.
Automation
Automation Automation manager does
not have access to the
current control surface
settings.
Automation There is no next scene
relative to the current
position in the scene list.
This is generated by recalling
the next scene when the
current scene is the last in
the scene list.
Automation There is no previous scene
relative to the current
position in the scene list.
This is generated by recall
the last scene when the
current scene is 00.00, that
is, the safe scene.
Automation The scene contains no scene
notes or MIDI data.
Automation There is no show loaded.
Appendix G: Troubleshooting
Solution
Avoid using these types of
operation.
Avoid this type of operation
on an empty scene.
Try again.
This is an indication of a
serious error. Contact Midas
Technical Support.
This is an indication of a
serious error. Contact Midas
Technical Support.
Try again or try switching off
the PRO Series Control
Centre and then switching it
back on again.
If the problem persists,
contact Midas Technical
Support.
Avoid this operation on the
last scene in the cue list.
Avoid this operation on the
safe scene.
Only carry out this type of
operation on a scene that
contains scene notes or MIDI
data.
Only carry out this type of
operation with a show loaded.
PRO Series Live Audio Systems
Owner's Manual