Simple Routing To Master Stereo Outputs - Midas PRO SERIES Owner's Manual

Simple routing to master stereo outputs

6
Change the parameters of the new
effect device as necessary. For
example, adjust control knobs, press
buttons etc. You can even change the
effect's name by editing its name field
(upper-left corner of effect window).
7
Click CLOSE to close the effect
window. The new effect will appear in
the effects rack.
You can now patch the new effect, which will
be on the Effects tabs of both the From and
To sections of the Patching screen. For
information on how to patch, see Chapter 8 "Patching" on page 71.
Simple routing to master stereo outputs
The following shows you how to obtain audio. Before proceeding with this operation,
make sure nothing is muted and master faders are up.
>> To obtain audio
Do one of the following:
• Press the ST (stereo) button of
an input fast strip.
• Press the ST (stereo) button of
a channel strip.
PRO Series Live Audio Systems
Owner's Manual
111