Outputs On The Gui; Output Fast Zone (Overview Screen); Gui Channel Strips - Midas PRO SERIES Owner's Manual

314

Outputs on the GUI

On the GUI, the output fast zone (mix bay only) merely provides feedback, such as
signal level, solo on/off status etc., whereas the output 'overview' displays (for each
output) in the channel strips provide limited control. Detailed control is provided by the
processing areas.
Only the Overview GUI screen (default) contains output fast strips (see "GUI" on
page 30).

Output fast zone (Overview screen)

The lower-right corner of the
Overview screen has two rows of
output fast strips. Each row
displays a bank of eight outputs, of
which there are three types (aux,
return and matrix).
On the GUI, output bank selection is
via a column of buttons to the right
of both banks, which replicate the
ones on the control surface's mix
bay (to right of ouputs).
As the two rows are independent of
each other, you can assign the
same bank to both of them.
For details of the contents of each
output fast strip, see "Mute, safes,
level and solo" on page 325.

GUI channel strips

Similarly to the inputs, when an output channel is selected, its 'overview' appears in the
GUI channel strip, as illustrated in the figures on the following pages. These overview
displays provide limited controls and status information, and give access to processing
areas.
The following processing areas are available from 'overview' displays in the GUI channel
strip.
Channel controls
Insert only
Configuration only
Insert and
configuration
Compressor
EQ
Buses
Solo, mute, safes
and fader only
Masters and solo,
mute, safes and
fader
PRO6 and PRO9
PRO3
Aux Return
N/A Yes
N/A Yes
Yes N/A
Yes N/A
Yes Yes
Yes (matrix Yes (matrix
only) only)
N/A N/A
Yes Yes
Chapter 31: Outputs
Matrix Master
N/A N/A
N/A N/A
Yes Yes
Yes Yes
Yes Yes
N/A Yes (matrix
only)
Yes N/A
N/A Yes
PRO Series Live Audio Systems
Owner's Manual