Error Description Messages - Midas PRO SERIES Owner's Manual

Troubleshooting automation
System Type
Automation
Automation

Error description messages

The following table contains the possible error description messages for both the file
and automation systems, which will start on the second line of the error message. The
"Error Message" column in the table contains the error message text that immediately
follows the "response:" text. For ease of reference the table lists the error messages in
alphabetical order.
Table 22: List of error description messages
Error Message
hexadecimal
number
<error code in
hexadecimal>
unknown error
code
a
artefact clone
policy violation
artefact creation
policy violation
artefact deletion
policy violation
artefact import
violation
artefact load
policy violation
artefact rename
policy violation
artefact
replication policy
violation
artefact save
policy violation
attempt to
overwrite existing
data (overwrite
not enabled)
PRO Series Live Audio Systems
Owner's Manual
Error Message
Failed to store point scene
Failed to unexpand point
scene range
System(s) Problem
File and Indication of a possible
Automation system error.
File and The cloning of this artefact
Automation (file type) is not allowed.
File and The creation of this file type
Automation is not allowed.
File and The deleting of this file type
Automation is not allowed.
File and The importing of this file type
Automation is not allowed.
File and The loading of this file type is
Automation not allowed.
File and The renaming of this file type
Automation is not allowed.
File and The replication of this file
Automation type is not allowed.
File and The saving of this file type is
Automation not allowed.
File and The operation to save or copy
Automation to the existing file is not
allowed, as files cannot be
overwritten.
Fault Condition
Attempting to complete point scene
storage by clicking OK after
selecting "Store to empty scene",
"Overwrite scene" or "Store to
empty scene".
Attempting to unexpand point scene
range. This is the opposite of
expanding the point scene range
(immediately above) and can only
be carried out if the 10 point scenes
to be unexpanded are empty.
Solution
Note down the hexadecimal
value of the error code and
contact Midas Technical
Support, giving them this
value.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
401