Chapter 16: Internal Effects; Overview Of The Internal Effects - Midas PRO SERIES Owner's Manual

Chapter 16: Internal Effects

This chapter describes the internal effects of the PRO Series. Initially, it explains how to
use the PRO Series Control Centre to operate the effects and then details all of their
available control functions and their use.

Overview of the internal effects

The Effects screen manages up to eight user-assignable effects devices, collectively
called the "internal effects pool". This is a 'bundle' of onboard creative audio effects
that provide onboard facilities where outboard effects units would have traditionally
been required. The effects are displayed on the screen in a 'virtual' eight-unit rack.
Typical Effects screen containing all of the available effects. (The PRO3 only has six
rack unit positions.)
All of the points in the control centre's signal flow where outboard effects can be
inserted, such as auxes and returns or insert points on input channels, audio
subgroups, mix and master buses, can be patched to effects in the internal effects pool
as well as external world XLRs. The following table shows the available internal effects
and where they can be found in this chapter.
Internal effect
Delay
Virtual DN780 Reverb
Flanger
Phaser
Pitch Shifter
SQ1 Dynamics
3-Band Compressor
PRO Series Live Audio Systems
Owner's Manual
Section reference
"Delay effect" on page 166
"Virtual DN780 Reverb effect" on page 168
"Flanger effect" on page 170
"Phaser effect" on page 171
"Pitch Shifter effect" on page 173
"SQ1 Dynamics effect" on page 174
"3-Band Compressor effect" on page 175
163