Midas PRO SERIES Owner's Manual page 177

Surround panning
Item
1
2
3
4
5
6
7
Although the position cursor changes automatically according to the adjustment
of the surround panning controls, you can also adjust it on the GUI using drag.
The following table shows the fader parameters with None selected as on/off in the
Surround Mode section of the Preferences screen (see "Setting the configuration
preferences" on page 249).
Table 9: Fader parameters with surround panning on/off
Parameter
Level (fb pan)
Image (fb pan)
Pan
Divergence (front
to back)
Divergence (front)
Divergence (back)
Centre level
LFE level
PRO Series Live Audio Systems
Owner's Manual
Description
fb pan control knob, moves position cursor in spatial diagram up/down.
Left-centre-right control knob, moves position cursor in spatial diagram
left/right.
front control knob, adjusts the divergence of the front speakers.
front to back control knob, adjusts the divergence of the front and rear
speakers.
back control knob, adjusts the divergence of the rear speakers.
centre level control knob, adjusts the divergence of the centre speaker.
LFE level control knob, adjusts the signal level of the LFE (usually a
subwoofer).
None mode off
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
None mode on
Yes
Yes
Yes
N/A
N/A
N/A
N/A
N/A
135
Notes
If left or right
channel has SIS
on, level is image
(below).
In other surround
modes, it is
front/back pan
(below).
See above
See above
N/A
N/A
N/A
N/A
N/A