Appendix N Parameters Affected By Copy And Paste; Overview - Midas PRO SERIES Owner's Manual

Appendix N: Parameters Affected By
Copy And Paste
This appendix shows the input and output channel parameters affected by copy and
paste operations, which are selected via the copy and paste buttons on the GUI (see
"Using copy and paste" on page 118).
The structure of this appendix is intended to follow the way that copy and paste
operates, that is, by channel or processing area.
Note: Some of the GUI displays in this appendix may look slightly different to the ones
on the PRO Series Control Centre you are using, as they may be taken from a different
type of PRO Series Live Audio System. For example, the PRO3 doesn't have a
Matrix 9 - 16 section in the GUI channel strip. However, all of the parameters affected
by copy and paste still apply.

Overview

The following table provides a quick reference for finding the copy and paste
parameters per channel in this appendix.
Control Inputs
area
Config- "Configuration
uration " on page 512
Comp- "Compressor"
ressor on page 514
Gate "Gate" on
page 516
EQ "EQ" on
(GEQ) page 517
Bus "Bus sends" on
sends page 518
Master "Master
routing routing" on
/fader page 519
section
PRO Series Live Audio Systems
Owner's Manual
Auxes Returns
"Configuration "Configuration
" on page 520 " on page 526
"Compressor" N/A
on page 521
N/A N/A
"EQ (GEQ)" on N/A
page 522
"Bus sends" on "Bus sends" on
page 524 page 527
"Master "Master
routing" on routing" on
page 525 page 528
Matrices Masters
"Configuration "Configuration
" on page 529 " on page 534
"Compressor" "Compressor"
on page 530 on page 535
N/A N/A
"EQ (GEQ)" on "EQ (GEQ)" on
page 531 page 536
N/A N/A
"Fader section" "Master
on page 533 routing" on
page 538
511