Basic copy operations
3
Touch [Center Staple & Fold].
–
If a cover sheet is added with the "Cover Sheet" function, the cover sheet (53-1/4 lb) cannot be
stapled.
–
When the "Center Staple & Fold" setting is selected, the following factory default settings are
automatically selected.
1-Sided > 2-Sided
Booklet
Recommended zoom ratio (64.7%) when the "Booklet" function is selected
–
When the "Center Staple & Fold" setting is selected, the following Finishing settings are not
available.
Group
Offset
Staple
Punch
Face Up
–
To cancel the "Center Staple & Fold" setting, touch [No] or the button for a different setting.
4
Touch [OK], and then touch [OK] again.
The Basic screen appears again.
2.12.3
To fold copies in three ("Tri-Fold" setting)
Finisher FS-610
Paper weight
16 lb to 21-1/4 lb
21-1/2 lb to 24 lb
Number of folded sheets
1 sheet
!
Detail
When copies are to be folded in three, settings can be specified to select whether the printed side is on
the inside or the outside. For details on selecting the setting, refer to
751/601
Paper size
8-1/2 × 11 w, A4 w, 16K w
Maximum number of sets
50 sets or less
Maximum number of tri-folded
sheets
3 sheets
1 sheet
"Copier Settings" on page
2
11-18.
2-68