Using Finisher Fs-520/Fs-607 Manually - Konica Minolta bizhub pro C6500P User Manual

Output Applications
5.8

Using Finisher FS-520/FS-607 Manually

The Finisher FS-520/FS-607 with Paper inserter PI-502 installed can be op-
erated manually, using the operation panel provided on the paper inserter.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are de-
scribed below.
- Finisher FS-520 + Paper inserter PI-502
– Staple (1 staple / 2 staples)
- Finisher FS-520 + Paper inserter PI-502 + Punch kit PK-512
– Staple (1 staple / 2 staples)
– Punch
1 oblique staple
- Finisher FS-607 + Paper inserter PI-502
– Staple (1 staple / 2 staples)
– Fold & Staple
– Multi Tri-Fold
- Finisher FS-607 + Paper inserter PI-502 + Punch kit PK-512
– Staple (1 staple / 2 staples)
– Fold & Staple
– Multi Tri-Fold
– Punch
bizhub PRO C6500P
2 parallel staples
5
Start/Stop button
Punch
5-25