Sorting/ Stapling Printed Sheets (Finisher Fs-503/520/607) - Konica Minolta bizhub pro C6500P User Manual

Output Applications
5 Output Applications
5.1 Sorting/ Stapling Printed Sheets (Finisher FS-
503/520/607)
The Finisher FS-503/520/607 has a primary (main) tray and a secondary (sub)
tray, each of which has the following output modes.
Output to the primary (main) tray
Non-sort : Non-sort mode simply means that the offset-stacker finisher
Collate
Uncollate : Uncollate mode groups together multiple sheets of each original
Staple
Combined with the output modes above except staple mode, you can also
choose to output face up or face down, and output front to back or back to
front.
Non-sort
bizhub PRO C6500P
modes are not selected. Printed Sheets will be stacked upon exit
without being offset by sorted sets.
: Collate mode outputs multiple sheets of the original set, having
each sorted set offset by 30 mm upon exit.
and offsets the sets by 30 mm upon exit.
: Staple mode offsets and staples each sorted set.
Staple
2 staples
1 oblique
staple
Example:
Make 3 printed sets
from 4 original sheets
Collate
Offset by 30mm
5
Uncollate
Offset by 30mm
5-3