Stapling (With Finisher Fs-501 Installed); Stapling (With Finisher Fs-601 Installed) - Konica Minolta bizhub c350 User Manual

3

Stapling (with finisher FS-501 installed)

The copies are bound together with a staple in the corner.
However, the pages can be stapled only if all of the following conditions are met.
G There are between 2 and 30 pages in the document.
G If standard-size paper is used, the paper sizes must be A3 L, A4 L and A4 C.
G
If non-standard-size paper is used, the paper width must be between 182 mm
and 297 mm.
G
If non-standard-size paper is used, the paper length must be between 182 mm
and 432 mm.
G
Copies are printed only on plain paper.
G If the "Mixed Original" function is used, the copies must be produced with paper
of the same width.
G This machine must not be set to Interrupt mode.
G The "Image Adjustment" function on the Application screen is not used.

Stapling (with finisher FS-601 installed)

The copies are bound together with a staple. Either the "1 Staple" or the "2 Staples"
Output setting can be selected.
However, the pages can be stapled only if all of the following conditions are met.
G There are between 2 and 50 pages in the document. (However, if the document
size is larger than B4 L, the document can contain no more than 25 pages.)
G If standard-size paper is used, the paper sizes must be A3 L, A4 L and A4 C.
G If non-standard-size paper is used, the paper width must be between 182 mm
and 297 mm.
G If non-standard-size paper is used, the paper length must be between 182 mm
and 432 mm.
G
Copies are printed only on plain paper.
G
If the "Mixed Original" function is used, the copies must be produced with paper
of the same width.
G This machine must not be set to Interrupt mode.
G The "Image Adjustment" function on the Application screen is not used.
3-10
3.4 Selecting Output Settings
C350