Canceling A Delayed Transmission; Sending A Fax To Multiple Locations (Broadcasting) - Konica Minolta FAX 9820 User Manual

HOME
13 When you are finished selecting locations, press the
4
No key at the SELECT LOCATION(S) message.
14 If you have selected multiple locations, your
machine asks if you want to confirm your selec-
tions with a printed report before proceeding. If you
do, press the Yes 3 key. After the report is
printed, the display shows BEGIN SCANNING? If
you want to make corrections, press the No
and go back to Step 9. To remove a location,
select the location in the same way, but press the
4
No key to delete it from your transmission.
15 When all of your selections are correct, press the
Start key. Your machine scans the documents into
memory and waits until the time and date you
have set before sending the fax. When scanning is
completed, your machine is available for other
transmission operations.
1 Press the Stop key. The display shows COMMU-
NICATION CANCEL.
Press the Yes 3 key. The display shows the
2
Location ID of the delayed transmission currently
loaded in your machine.
Press the Yes 3 key.
3
4 If the delayed transmission was a feeder transmis-
sion, press the Stop key again to remove the
document from the document feeder.
In a single operation, you can send a fax to up to
as many One Touch and Auto Dial numbers as
you have programmed, plus as many as 10
4
key
manually entered numbers.
The Konica FAX 9820 can send a fax to as many
as 139 locations.
1 Load your documents.
2 Press the Select Function key.
3 Press the 2/Broadcast Feeder TX One Touch key.
The display shows BROADCAST/MEMORY TX.
4 Select a location. Refer to the instructions below.
To Select Using
A One Touch key
An Auto Dial number
A group
A number dialed on
the numeric keypad
Do This
Press the One Touch key. (On the
Konica FAX 9820, lift the main One
Touch keypad to access One Touch keys
16-30.)
Press the Auto Dial key, then enter the
two-digit Auto Dial number on the
numeric keypad.
Using the numeric keypad, press the #
key, then enter the number of the group
you want to use.
Dial as you would on a normal telephone.