Table of Contents
Advertisement
HOME
The One Touch keys are your machine's most impor-
tant tool. Use them for quick, one-touch dialing, and to
access most functions and programming options.
Using the One Touch Keys for Dialing
To use a One Touch key for dialing, just press the
appropriate One Touch key. For each key, you can
program up to two telephone numbers: a primary
number, which will always be dialed first, and an
optional alternate number which will be automati-
cally dialed if the first number is busy or if there is
no answer. You can also use the Search key to find
locations programmed into One Touch keys.
•
The Konica FAX 9820 has keys 1– 15 available
on the main One Touch panel, and keys 16–30
available beneath the main One Touch panel.
To access One Touch keys 16–30 on the Konica FAX
9820:
•
Lift up the main One Touch keypad by the latch
(on the left side of the cover). This lets you use
keys 16–30.
•
When you're finished, close the keypad to con-
tinue normal operation and programming.
Use One Touch keys 1–10 for selecting special trans-
mission and reception functions, for obtaining reports,
and for quick access to programming functions.
To select a function:
1
Press the Select Function key.
2
Press the corresponding One Touch key.
1/Delayed TX key: Use this key to send a fax at a
later time and date which you specify (within three
days). See page 43.
2/Broadcast Feeder TX key: Use this key to send
a fax to multiple locations (page 45) or to switch
Advertisement
Table of Contents
