Loading Documents - Konica Minolta FAX 9820 User Manual

HOME
When loading multiple-page documents, do not load
paper thinner than 0.003" (0.08 mm) or thicker than
0.005" (0.13 mm). For single-page documents, do
not load paper thinner than 0.002" (0.06 mm) or
thicker than 0.006" (0.15 mm).
To prevent paper jams and problems during
operation, stack your documents neatly, aligning
their edges, before loading. Do not load documents
of different sizes at the same time.
Tip: You can load and prepare to transmit a document
while your machine is still sending or receiving another
message, as long as the document feeder is clear. To
do this, load the document, select your location and
press the Start key. Your document will be sent as a pri-
ority when the current communication ends.
1 Adjust the document guides to the width of the
paper you are using.
2 Stack your documents neatly, then inser t them
face down into the document feeder. Readjust the
document guides for a snug fit.
3 Your machine will grip the documents and pull the
bottom page into the machine.
4 To obtain the best possible quality for the type of
document you are scanning or faxing, use the Yes
3key to set the resolution of your document. For
most normal documents, the default STD setting
works well.
Document Type Resolution
to Use
Normal office documents STD (Standard)
Documents with small FINE or EX. FINE
type or other fine details
Documents with photos PHOTO
or many shades of gray
Resolution
of Scan
200 X 100 dpi
s
FINE: 200 X 200 dpi
EX.FINE: 200 X 400 dpi
200 X 200 dpi