Setting Up The Paper Sources ("Paper Source Setup" Menu) - Konica Minolta FX-3 User Manual

Using the Utility Mode
5.3 Setting Up the Paper Sources ("PAPER SOURCE
SETUP" Menu)
From the "PAPER SOURCE SETUP" menu, the various settings for the
paper trays can be changed.
"PAPER SOURCE SETUP" menu:
PAPER SOURCE
No.
SETUP
1 INCH/METRIC
2 TRAY1 PAPER
3 PAPER TYPE
* For details on the settings, refer to the Di1611/Di2011 User Manual.
Fax Kit (FX-3)
Description
This function can be used to set the size measurement
system for the paper loaded in each tray. It can be used
to select whether paper measured in centimeters
("METRIC"), such as A4 and B5 sizes, or paper
measured in inches ("INCH"), such as Letter size, is
loaded. If no particular setting is selected, the paper size
is detected automatically.*
If "METRIC" is selected for a paper tray on a model set
to use inch measurements, paper loaded into that tray
cannot be used in Fax mode.
If "INCH" is selected for a paper tray on a model set to
use metric measurements, paper loaded into that tray
cannot be used in Fax mode.
• For metric area:
The manufacturer's default setting is "METRIC".
• For inch area:
The manufacturer's default setting is "INCH".
This function can be used to set the type of paper
("PLAIN", "OHP", "CARD" or "ENVELOPE") loaded into
the Tray1, and the size of the paper ("AUTO" or "SIZE
INPUT"). If the paper size is set to "SIZE INPUT", type in
the paper size.*
If a setting other than "PLAIN" or "AUTO" is selected,
paper loaded into Tray1 cannot be used in Fax mode.
• The manufacturer's default settings are "PLAIN" and
"AUTO".
For details on this menu, refer to the Di1611/Di2011
User Manual.
5
5-5